Australia
HSDPA
LTE
50%

Bendigo Telco APN settings for Allview E4

      Bendigo Telco   Allview E4   Android

Allview E4 is compatible with Bendigo Telco HSDPA and Bendigo Telco LTE 50%.

To configure Bendigo Telco APN settings with Allview E4 follow below steps.

Bendigo Telco Internet APN settings

Go to Settings More Cellular network settings Access point names

Press the Menu and select New APN

Enter name: Bendigo Telco 1
APN: connect
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS Proxy:
MMS Port:
MCC: 505
MNC: 02
Authentication type: PAP
APN type: internet

Keep the default values set by device for all blank fields shown above.

For Allview E4, when you type Bendigo Telco APN settings, make sure you enter APN settings in correct case. For example, if you are entering Bendigo Telco Internet APN settings make sure you enter APN as connect and not as CONNECT or Connect.

Bendigo Telco MCC-MNC values

505-02

Allview E4 compatibility with Bendigo Telco

Allview E4 is compatible with below network frequencies of Bendigo Telco.

3G
HSDPA2100 MHz, 900 MHz
4G
LTEBand 3 1800 MHz*
*These frequencies of Bendigo Telco may not have countrywide coverage for Allview E4.

Explain Allview E4 compatibility with Bendigo Telco

Bendigo Telco 3G APN with Allview E4

Allview E4 supports Bendigo Telco 3G on HSDPA 2100 MHz and 900 MHz.

Bendigo Telco 4G LTE APN with Allview E4

Allview E4 supports Bendigo Telco 4G on LTE Band 3 1800 MHz only in some areas of Australia.

Overall compatibililty of Allview E4 with Bendigo Telco is 67%. The compatibility of Allview E4 with Bendigo Telco, or the Bendigo Telco network support on Allview E4 we have explained here is only a technical specification match between Allview E4 and Bendigo Telco network. Even Allview E4 is listed as compatible here, Bendigo Telco network can still disallow (sometimes) Allview E4 in their network using IMEI ranges. Therefore, this only explains if Bendigo Telco allows Allview E4 in their network, whether Allview E4 will work properly or not, in which bands Allview E4 will work on Bendigo Telco and the network performance between Bendigo Telco and Allview E4. To check if Allview E4 is really allowed in Bendigo Telco network please contact Bendigo Telco support. Do not use this website to decide to buy Allview E4 to use on Bendigo Telco.

Allview E4 network specifications

OS Android OS, v5.1 (Lollipop)
Network bands GSM / HSPA / LTE
Speed HSPA 21.1/5.76 Mbps, LTE Cat4 150/50 Mbps
Network frequencies GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2
HSDPA 900 / 2100
LTE band 2(1900), 3(1800), 20(800), 38(2600)
Select a different device... Select a different network...

Post reply

Name
Email
Device
Network