Australia
HSDPA
LTE
50%

Boost Mobile APN settings for Allview V3 Viper

      Boost Mobile   Allview V3 Viper   Android

Allview V3 Viper is compatible with Boost Mobile HSDPA and Boost Mobile LTE 50%.

To configure Boost Mobile APN settings with Allview V3 Viper follow below steps.

Boost Mobile Internet APN settings

In your Allview V3 Viper app drawer, go to Settings Connections Mobile networks Access Point Names

Add a new APN by pressing ADD on right top corner. If Allview V3 Viper has already set values for Boost Mobile 1 for any fields below leave them. Change others as below.

Name: Boost Mobile 1
APN: telstra.wap
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS proxy:
MMS port:
MCC: 505
MNC: 01
Authentication type:
APN type: default,supl
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Boost Mobile 1 APN settings for Android 8 screenshot

Restart your Allview V3 Viper to apply Boost Mobile 1 APN settings.

Boost Mobile MMS APN settings

In your Allview V3 Viper app drawer, go to Settings Connections Mobile networks Access Point Names

Add a new APN by pressing ADD on right top corner. If Allview V3 Viper has already set values for Boost Mobile 3 for any fields below leave them. Change others as below.

Name: Boost Mobile 3
APN: telstra.mms
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002
MMS proxy: 10.1.1.180
MMS port: 80
MCC: 505
MNC: 01
Authentication type:
APN type: mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Boost Mobile 3 APN settings for Android 8 screenshot

Restart your Allview V3 Viper to apply Boost Mobile 3 APN settings.

For Allview V3 Viper, when you type Boost Mobile APN settings, make sure you enter APN settings in correct case. For example, if you are entering Boost Mobile Internet APN settings make sure you enter APN as telstra.wap and not as TELSTRA.WAP or Telstra.wap. If entering Boost Mobile MMS APN settings above to your Allview V3 Viper, APN should be entered as telstra.mms and not as TELSTRA.MMS or Telstra.mms.

Boost Mobile MCC-MNC values

505-01

Allview V3 Viper compatibility with Boost Mobile

Allview V3 Viper is compatible with below network frequencies of Boost Mobile.

3G
HSDPA850 MHz
4G
LTEBand 3 1800 MHz, Band 1 2100 MHz*
*These frequencies of Boost Mobile may not have countrywide coverage for Allview V3 Viper.

Explain Allview V3 Viper compatibility with Boost Mobile

Boost Mobile 3G APN with Allview V3 Viper

Allview V3 Viper supports Boost Mobile 3G on HSDPA 850 MHz.

Boost Mobile 4G LTE APN with Allview V3 Viper

Allview V3 Viper supports Boost Mobile 4G on LTE Band 3 1800 MHz and Band 1 2100 MHz only in some areas of Australia.

Overall compatibililty of Allview V3 Viper with Boost Mobile is 67%. The compatibility of Allview V3 Viper with Boost Mobile, or the Boost Mobile network support on Allview V3 Viper we have explained here is only a technical specification match between Allview V3 Viper and Boost Mobile network. Even Allview V3 Viper is listed as compatible here, Boost Mobile network can still disallow (sometimes) Allview V3 Viper in their network using IMEI ranges. Therefore, this only explains if Boost Mobile allows Allview V3 Viper in their network, whether Allview V3 Viper will work properly or not, in which bands Allview V3 Viper will work on Boost Mobile and the network performance between Boost Mobile and Allview V3 Viper. To check if Allview V3 Viper is really allowed in Boost Mobile network please contact Boost Mobile support. Do not use this website to decide to buy Allview V3 Viper to use on Boost Mobile.

Allview V3 Viper network specifications

OS Android 8.0 (Oreo)
Network bands GSM / HSPA / LTE
Speed HSPA 21.1/5.76 Mbps, LTE Cat4 150/50 Mbps
Network frequencies GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2
HSDPA 850 / 900 / 1900 / 2100
LTE band 1(2100), 3(1800), 5(850), 8(900), 20(800), 38(2600), 39(1900), 40(2300)
Select a different device... Select a different network...

Post reply

Name
Email
Device
Network
Allview V3 Viper

Warning: count(): Parameter must be an array or an object that implements Countable in /var/www/html/apn.gishan.net/xx/_feed.php on line 162