Boost Mobile APN settings for TECNO Spark Go
TECNO Spark Go is compatible with Boost Mobile HSDPA and Boost Mobile LTE 50%.
To configure Boost Mobile APN settings with TECNO Spark Go follow below steps.
Boost Mobile Internet APN settings
Open Settings Connections Mobile networks Access Point Names of your TECNO Spark Go.
Press ADD on right top corner. If TECNO Spark Go has already set values for Boost Mobile 1 for any fields below leave them. Change the other fields as below.
Name: Boost Mobile 1
APN: telstra.wap
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS proxy:
MMS port:
MCC: 505
MNC: 01
Authentication type:
APN type: default,supl
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set
Restart TECNO Spark Go to apply new Boost Mobile 1 APN settings.
Boost Mobile MMS APN settings
Open Settings Connections Mobile networks Access Point Names of your TECNO Spark Go.
Press ADD on right top corner. If TECNO Spark Go has already set values for Boost Mobile 3 for any fields below leave them. Change the other fields as below.
Name: Boost Mobile 3
APN: telstra.mms
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002
MMS proxy: 10.1.1.180
MMS port: 80
MCC: 505
MNC: 01
Authentication type:
APN type: mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set
Restart TECNO Spark Go to apply new Boost Mobile 3 APN settings.
For TECNO Spark Go, when you type Boost Mobile APN settings, make sure you enter APN settings in correct case. For example, if you are entering Boost Mobile Internet APN settings make sure you enter APN as telstra.wap and not as TELSTRA.WAP or Telstra.wap. If entering Boost Mobile MMS APN settings above to your TECNO Spark Go, APN should be entered as telstra.mms and not as TELSTRA.MMS or Telstra.mms.
Boost Mobile MCC-MNC values
TECNO Spark Go compatibility with Boost Mobile
TECNO Spark Go is compatible with below network frequencies of Boost Mobile.
3G | HSDPA | 850 MHz |
4G | LTE | Band 3 1800 MHz, Band 1 2100 MHz* |
Explain TECNO Spark Go compatibility with Boost Mobile
Boost Mobile 3G APN with TECNO Spark Go
TECNO Spark Go supports Boost Mobile 3G on HSDPA 850 MHz.
Boost Mobile 4G LTE APN with TECNO Spark Go
TECNO Spark Go supports Boost Mobile 4G on LTE Band 3 1800 MHz and Band 1 2100 MHz only in some areas of Australia.
Overall compatibililty of TECNO Spark Go with Boost Mobile is 67%. The compatibility of TECNO Spark Go with Boost Mobile, or the Boost Mobile network support on TECNO Spark Go we have explained here is only a technical specification match between TECNO Spark Go and Boost Mobile network. Even TECNO Spark Go is listed as compatible here, Boost Mobile network can still disallow (sometimes) TECNO Spark Go in their network using IMEI ranges. Therefore, this only explains if Boost Mobile allows TECNO Spark Go in their network, whether TECNO Spark Go will work properly or not, in which bands TECNO Spark Go will work on Boost Mobile and the network performance between Boost Mobile and TECNO Spark Go. To check if TECNO Spark Go is really allowed in Boost Mobile network please contact Boost Mobile support. Do not use this website to decide to buy TECNO Spark Go to use on Boost Mobile.
TECNO Spark Go network specifications
| OS | Android 9.0 (Pie), HIOS 5.0 |
| Network bands | GSM / HSPA / LTE |
| Speed | HSPA 42.2/5.76 Mbps, LTE Cat4 150/50 Mbps |
| Network frequencies | GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2 HSDPA 850 / 900 / 2100 LTE band 1(2100), 3(1800), 5(850), 8(900), 38(2600), 40(2300), 41(2500) |
