Australia
HSDPA
LTE
50%

Dodo APN settings for TECNO Spark Go

      Dodo   TECNO Spark Go   Android

TECNO Spark Go is compatible with Dodo HSDPA and Dodo LTE 50%.

To configure Dodo APN settings with TECNO Spark Go follow below steps.

Dodo Internet APN settings

Open Settings Connections Mobile networks Access Point Names of your TECNO Spark Go.

Press ADD on right top corner. If TECNO Spark Go has already set values for Dodo 1 for any fields below leave them. Change the other fields as below.

Name: Dodo 1
APN: Internet
Proxy: 202.139.83.152
Port: 9201
Username:
Password:
Server: http://networker.optus.net.au/wap/index.wml
MMSC:
MMS proxy:
MMS port:
MCC:
MNC:
Authentication type:
APN type: default
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Dodo 1 APN settings for Android 9 screenshot

Restart TECNO Spark Go to apply new Dodo 1 APN settings.

Dodo MMS APN settings

Open Settings Connections Mobile networks Access Point Names of your TECNO Spark Go.

Press ADD on right top corner. If TECNO Spark Go has already set values for Dodo 3 for any fields below leave them. Change the other fields as below.

Name: Dodo 3
APN: MMS
Proxy: 61.88.190.10
Port: 9201
Username:
Password:
Server:
MMSC: http://mmsc.optus.com.au:8002
MMS proxy:
MMS port:
MCC:
MNC:
Authentication type:
APN type: mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Dodo 3 APN settings for Android 9 screenshot

Restart TECNO Spark Go to apply new Dodo 3 APN settings.

For TECNO Spark Go, when you type Dodo APN settings, make sure you enter APN settings in correct case. For example, if you are entering Dodo Internet APN settings make sure you enter APN as Internet and not as INTERNET or Internet. If entering Dodo MMS APN settings above to your TECNO Spark Go, APN should be entered as MMS and not as mms or Mms.

TECNO Spark Go compatibility with Dodo

TECNO Spark Go is compatible with below network frequencies of Dodo.

3G
HSDPA2100 MHz, 900 MHz
4G
LTEBand 3 1800 MHz, Band 40 2300 MHz, Band 1 2100 MHz*
*These frequencies of Dodo may not have countrywide coverage for TECNO Spark Go.

Explain TECNO Spark Go compatibility with Dodo

Dodo 3G APN with TECNO Spark Go

TECNO Spark Go supports Dodo 3G on HSDPA 2100 MHz and 900 MHz.

Dodo 4G LTE APN with TECNO Spark Go

TECNO Spark Go supports Dodo 4G on LTE Band 3 1800 MHz, Band 40 2300 MHz and Band 1 2100 MHz only in some areas of Australia.

Overall compatibililty of TECNO Spark Go with Dodo is 67%. The compatibility of TECNO Spark Go with Dodo, or the Dodo network support on TECNO Spark Go we have explained here is only a technical specification match between TECNO Spark Go and Dodo network. Even TECNO Spark Go is listed as compatible here, Dodo network can still disallow (sometimes) TECNO Spark Go in their network using IMEI ranges. Therefore, this only explains if Dodo allows TECNO Spark Go in their network, whether TECNO Spark Go will work properly or not, in which bands TECNO Spark Go will work on Dodo and the network performance between Dodo and TECNO Spark Go. To check if TECNO Spark Go is really allowed in Dodo network please contact Dodo support. Do not use this website to decide to buy TECNO Spark Go to use on Dodo.

TECNO Spark Go network specifications

OS Android 9.0 (Pie), HIOS 5.0
Network bands GSM / HSPA / LTE
Speed HSPA 42.2/5.76 Mbps, LTE Cat4 150/50 Mbps
Network frequencies GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2
HSDPA 850 / 900 / 2100
LTE band 1(2100), 3(1800), 5(850), 8(900), 38(2600), 40(2300), 41(2500)
See full specs at GSM.COOL... Select a different device... Select a different network...
TECNO Spark Dodo APN settings
100% compatible with Dodo
HSDPA
TECNO Spark 2 Dodo APN settings
100% compatible with Dodo
HSDPA
TECNO Spark 3 Dodo APN settings
100% compatible with Dodo
HSDPA
TECNO Spark CM Dodo APN settings
67% compatible with Dodo
HSDPA   LTE
TECNO Spark Pro Dodo APN settings
100% compatible with Dodo
HSDPA   LTE