InterNode APN settings for TECNO Spark Go
TECNO Spark Go is compatible with InterNode HSDPA and InterNode LTE 50%.
To configure InterNode APN settings with TECNO Spark Go follow below steps.
InterNode Internet APN settings
Open Settings Connections Mobile networks Access Point Names of your TECNO Spark Go.
Press ADD on right top corner. If TECNO Spark Go has already set values for InterNode 1 for any fields below leave them. Change the other fields as below.
Name: InterNode 1
APN type: default,supl
APN protocol: IPv4
APN roaming protocol: IPv4
APN PPP phone number: Not set
Restart TECNO Spark Go to apply new InterNode 1 APN settings.
For TECNO Spark Go, when you type InterNode APN settings, make sure you enter APN settings in correct case. For example, if you are entering InterNode Internet APN settings make sure you enter APN as internode and not as INTERNODE or Internode.
InterNode MCC-MNC values
TECNO Spark Go compatibility with InterNode
TECNO Spark Go is compatible with below network frequencies of InterNode.
|HSDPA||2100 MHz, 900 MHz|
|LTE||Band 3 1800 MHz, Band 40 2300 MHz, Band 1 2100 MHz*|
Explain TECNO Spark Go compatibility with InterNode
InterNode 3G APN with TECNO Spark Go
TECNO Spark Go supports InterNode 3G on HSDPA 2100 MHz and 900 MHz.
InterNode 4G LTE APN with TECNO Spark Go
TECNO Spark Go supports InterNode 4G on LTE Band 3 1800 MHz, Band 40 2300 MHz and Band 1 2100 MHz only in some areas of Australia.
Overall compatibililty of TECNO Spark Go with InterNode is 67%. The compatibility of TECNO Spark Go with InterNode, or the InterNode network support on TECNO Spark Go we have explained here is only a technical specification match between TECNO Spark Go and InterNode network. Even TECNO Spark Go is listed as compatible here, InterNode network can still disallow (sometimes) TECNO Spark Go in their network using IMEI ranges. Therefore, this only explains if InterNode allows TECNO Spark Go in their network, whether TECNO Spark Go will work properly or not, in which bands TECNO Spark Go will work on InterNode and the network performance between InterNode and TECNO Spark Go. To check if TECNO Spark Go is really allowed in InterNode network please contact InterNode support. Do not use this website to decide to buy TECNO Spark Go to use on InterNode.
TECNO Spark Go network specifications
|OS||Android 9.0 (Pie), HIOS 5.0|
|Network bands||GSM / HSPA / LTE|
|Speed||HSPA 42.2/5.76 Mbps, LTE Cat4 150/50 Mbps|
|Network frequencies||GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2|
HSDPA 850 / 900 / 2100
LTE band 1(2100), 3(1800), 5(850), 8(900), 38(2600), 40(2300), 41(2500)