iPrimus APN settings for Wiko View2 Go
Wiko View2 Go is compatible with iPrimus HSDPA and iPrimus LTE.
To configure iPrimus APN settings with Wiko View2 Go follow below steps.
iPrimus Internet APN settings
In your Wiko View2 Go app drawer, go to Settings Connections Mobile networks Access Point Names
Add a new APN by pressing ADD on right top corner. If Wiko View2 Go has already set values for iPrimus 1 for any fields below leave them. Change others as below.
Name: iPrimus 1
APN: primuslns1
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS proxy:
MMS port:
MCC:
MNC:
Authentication type:
APN type: default,supl
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set
Restart your Wiko View2 Go to apply iPrimus 1 APN settings.
For Wiko View2 Go, when you type iPrimus APN settings, make sure you enter APN settings in correct case. For example, if you are entering iPrimus Internet APN settings make sure you enter APN as primuslns1 and not as PRIMUSLNS1 or Primuslns1.
Wiko View2 Go compatibility with iPrimus
Wiko View2 Go is compatible with below network frequencies of iPrimus.
3G | HSDPA | 2100 MHz, 900 MHz |
4G | LTE | Band 7 2600 MHz Band 3 1800 MHz, Band 1 2100 MHz* |
Explain Wiko View2 Go compatibility with iPrimus
iPrimus 3G APN with Wiko View2 Go
Wiko View2 Go supports iPrimus 3G on HSDPA 2100 MHz and 900 MHz.
iPrimus 4G LTE APN with Wiko View2 Go
Wiko View2 Go supports iPrimus 4G on LTE Band 7 2600 MHz.
It will also support iPrimus 4G on LTE Band 3 1800 MHz and Band 1 2100 MHz only in some areas of Australia.
Overall compatibililty of Wiko View2 Go with iPrimus is 100%. The compatibility of Wiko View2 Go with iPrimus, or the iPrimus network support on Wiko View2 Go we have explained here is only a technical specification match between Wiko View2 Go and iPrimus network. Even Wiko View2 Go is listed as compatible here, iPrimus network can still disallow (sometimes) Wiko View2 Go in their network using IMEI ranges. Therefore, this only explains if iPrimus allows Wiko View2 Go in their network, whether Wiko View2 Go will work properly or not, in which bands Wiko View2 Go will work on iPrimus and the network performance between iPrimus and Wiko View2 Go. To check if Wiko View2 Go is really allowed in iPrimus network please contact iPrimus support. Do not use this website to decide to buy Wiko View2 Go to use on iPrimus.
Wiko View2 Go network specifications
| OS | Android 8.1 (Oreo) |
| Network bands | GSM / HSPA / LTE |
| Speed | HSPA 42.2/11.5 Mbps, LTE Cat4 150/50 Mbps |
| Network frequencies | GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2 HSDPA 850 / 900 / 1900 / 2100 LTE band 1(2100), 3(1800), 7(2600), 20(800) |
