Australia
HSDPA
LTE

Optus APN settings for Allview V2 Viper Xe

, Updated:       Optus   Allview V2 Viper Xe   Android

Allview V2 Viper Xe is compatible with Optus HSDPA and Optus LTE.

To configure Optus APN settings with Allview V2 Viper Xe follow below steps. Allview V2 Viper Xe maximum data transter speed with Optus is 150.8/51 Mbps while Optus is capable of speeds up to 300/100 Mbps.

Optus Internet APN settings

Go to Settings More / Mobile networks Access Point Names

Press on right top

Name: Optus 1
APN: yesinternet
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS proxy:
MMS port:
MCC: 505
MNC: 02
Authentication type: PAP
APN type: default
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Do not change the default values set by device for all blank fields above.

If the above Optus Internet APN settings do not work on your V2 Viper Xe, make below changes to Optus Internet APN settings to get Optus Yes Internet on your Allview V2 Viper Xe.

APN typedefault,supl
Authentication typeNone

If the above Optus Internet APN settings too do not work on your V2 Viper Xe, make below changes to Optus Internet APN settings to get Optus Business Mobile Broadband on your Allview V2 Viper Xe.

APNyesbusiness
APN typeblank
Authentication typeNone

If the above Optus Internet APN settings too do not work on your V2 Viper Xe, make below changes to Optus Internet APN settings to get Optus Internet on your Allview V2 Viper Xe.

APNinternet
Authentication typeNone

If the above Optus Internet APN settings too do not work on your V2 Viper Xe, make below changes to Optus Internet APN settings to get Optus Internet on your Allview V2 Viper Xe.

APNinternet
APN typedefault,supl
Authentication typeNone

Optus MMS APN settings

Go to Settings More / Mobile networks Access Point Names

Press on right top

Name: Optus 3
APN: mms
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.optus.com.au:8002/
MMS proxy: 61.88.190.10
MMS port: 8070
MCC: 505
MNC: 02
Authentication type: PAP
APN type: mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Do not change the default values set by device for all blank fields above.

If the above Optus MMS APN settings too do not work on your V2 Viper Xe, make below changes to Optus MMS APN settings to get Optus MMS on your Allview V2 Viper Xe.

Authentication typeNone

For Allview V2 Viper Xe, when you type Optus APN settings, make sure you enter APN settings in correct case. For example, if you are entering Optus Internet APN settings make sure you enter APN as yesinternet and not as YESINTERNET or Yesinternet. If entering Optus MMS APN Settings above to your Allview V2 Viper Xe, APN should be entered as mms and not as MMS or Mms.

Optus MCC-MNC values

505-02
505-90

Allview V2 Viper Xe compatibility with Optus

Allview V2 Viper Xe is compatible with below network frequencies of Optus.

3G
HSDPA2100 MHz, 900 MHz
4G
LTEBand 7 2600 MHz
Band 3 1800 MHz, Band 40 2300 MHz, Band 1 2100 MHz*
*These frequencies of Optus may not have countrywide coverage for Allview V2 Viper Xe.

Explain Allview V2 Viper Xe compatibility with Optus

Optus 3G APN with Allview V2 Viper Xe

Allview V2 Viper Xe supports Optus 3G on HSDPA 2100 MHz and 900 MHz.

Optus 4G LTE APN with Allview V2 Viper Xe

Allview V2 Viper Xe supports Optus 4G on LTE Band 7 2600 MHz.
It will also support Optus 4G on LTE Band 3 1800 MHz, Band 40 2300 MHz and Band 1 2100 MHz only in some areas of Australia.

Overall compatibililty of Allview V2 Viper Xe with Optus is 100%. The compatibility of Allview V2 Viper Xe with Optus, or the Optus network support on Allview V2 Viper Xe we have explained here is only a technical specification match between Allview V2 Viper Xe and Optus network. Even Allview V2 Viper Xe is listed as compatible here, Optus network can still disallow (sometimes) Allview V2 Viper Xe in their network using IMEI ranges. Therefore, this only explains if Optus allows Allview V2 Viper Xe in their network, whether Allview V2 Viper Xe will work properly or not, in which bands Allview V2 Viper Xe will work on Optus and the network performance between Optus and Allview V2 Viper Xe. To check if Allview V2 Viper Xe is really allowed in Optus network please contact Optus support. Do not use this website to decide to buy Allview V2 Viper Xe to use on Optus.

Max download & upload speeds on Optus 4G for Allview V2 Viper Xe per LTE band

Band 3 1800 150.8 Mbps 51 Mbps
Band 40 2300 150.8 Mbps 51 Mbps
Band 7 2600 150.8 Mbps 51 Mbps

Allview V2 Viper Xe network specifications

OS Android 6.0 (Marshmallow)
Network bands GSM / HSPA / LTE
Speed HSPA 21.1/5.76 Mbps, LTE Cat4 150/50 Mbps
Network frequencies GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2
HSDPA 900 / 1900 / 2100
LTE band 1(2100), 3(1800), 7(2600), 8(900), 20(800), 38(2600), 39(1900), 40(2300), 41(2500)
See full specs at GSM.COOL... Select a different device... Select a different network...
Allview V2 Viper X+ Optus APN settings
100% compatible with Optus
HSDPA   LTE
Allview V2 Viper Optus APN settings
100% compatible with Optus
HSDPA   LTE
Allview V2 Viper e Optus APN settings
100% compatible with Optus
HSDPA
Allview V2 Viper i Optus APN settings
100% compatible with Optus
HSDPA
Allview V2 Viper S Optus APN settings
100% compatible with Optus
HSDPA   LTE
Allview V2 Viper X Optus APN settings
100% compatible with Optus
HSDPA   LTE
Allview V2 Viper i4G Optus APN settings
100% compatible with Optus
HSDPA   LTE