Telstra APN Settings
Telstra APN settings for mobile phones & tablets
Telstra APN settings can be configured to browse internet or send and receive MMS with Telstra. Configure your device using one of the below Telstra APN settings. Only few of Telstra APN settings will be compatible with your mobile device and Telstra. Please try below APN setting configurations, Telstra Internet and MMS APN settings, Telstra Internet, Telstra MMS, Telstra MMS, Telstra one by one to get the correct APN settings applied to your device on Telstra.
Telstra Internet and MMS APN settings
APN | telstra.iph |
MMSC | http://mmsc.telstra.com:8002 |
MMS proxy | 10.1.1.180 |
MMS proxy port | 80 |
APN type | default,supl,mms |
Authentication type | none |
Telstra Internet APN Settings
APN | telstra.wap |
APN type | default,supl |
Authentication type | None |
Telstra MMS APN Settings
APN | telstra.mms |
MMSC | http://mmsc.telstra.com:8002/ |
MMS proxy | 10.1.1.180 |
MMS proxy port | 80 |
APN type | mms |
Authentication type | None |
Telstra MMS APN Settings
APN | Telstra.mms |
MMSC | http://mmsc.telstra.com:8002 |
MMS proxy | 10.1.1.180 |
MMS proxy port | 80 |
APN type | mms |
Authentication type | None |
Telstra APN settings for internet dongles
Telstra
APN | telstra.internet |
Dial number | *99# |
PDP type | IP |
Authentication type | PAP |
When you type Telstra APN settings, make sure you enter APN settings in correct case. For example, in Telstra Internet and MMS APN settings make sure you enter APN as telstra.iph and not as TELSTRA.IPH or Telstra.iph.
MCC & MNC values for Telstra
Telstra network frequencies
3G | UMTS 850 MHz |
4G | LTE Band 28 700 LTE Band 3 1800, LTE Band 7 2600, LTE Band 1 2100* |
Telstra VoLTE
Telstra supports Voice over LTE (VoLTE)
since September, 2015 via
LTE band 28 (700)
LTE band 3 (1800) and
LTE band 7 (2600).
Telstra Max upload & download speeds
Telstra is a LTE CAT11 operator.
Max upload speed | 100 Mbps |
Max download speed | 300 Mbps |
Comments
Activating hotspot deactivates internet access for the phone and consequently any tethered devices. I've tried all the variants of your published APN settings for Meizu 16S (although mine is Meizu 16).
I had no issues with my Meizu 15 on Telstra running Android 7.1.1.
After 2 hours of trawling websites and forums everything points to a Telstra and Android 8.1 issue. No-one has problems on Optus or Vodafone. Is there a solution, please?