Australia
HSDPA
LTE
50%

Telstra APN settings for Allview P8 Energy

      Telstra   Allview P8 Energy   Android

Allview P8 Energy is not compatible with Telstra HSDPA and compatible with Telstra LTE 50%.

Allview P8 Energy does not appear to be fully compatible with Telstra at this time. It will only support Telstra 4G LTE only in certain areas of Australia. Please check the compatibility of Allview P8 Energy with Telstra for more details.

To configure Telstra APN settings with Allview P8 Energy follow below steps. Allview P8 Energy maximum data transter speed with Telstra is 150.8/51 Mbps while Telstra is capable of speeds up to 300/100 Mbps.

Telstra Internet & MMS APN settings

Go to Settings More Cellular network settings Access point names

Press the Menu and select New APN

Enter name: Telstra 2
APN: telstra.iph
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002
MMS Proxy: 10.1.1.180
MMS Port: 80
MCC: 505
MNC: 01
Authentication type: none
APN type: default,supl,mms

Keep the default values set by device for all blank fields shown above.

Telstra Internet APN Settings

Go to Settings More Cellular network settings Access point names

Press the Menu and select New APN

Enter name: Telstra 1
APN: telstra.wap
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS Proxy:
MMS Port:
MCC: 505
MNC: 01
Authentication type: None
APN type: default,supl

Keep the default values set by device for all blank fields shown above.

Telstra MMS APN Settings

Go to Settings More Cellular network settings Access point names

Press the Menu and select New APN

Enter name: Telstra 3
APN: telstra.mms
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002/
MMS Proxy: 10.1.1.180
MMS Port: 80
MCC: 505
MNC: 01
Authentication type: None
APN type: mms

Keep the default values set by device for all blank fields shown above.

Telstra MMS APN Settings

Go to Settings More Cellular network settings Access point names

Press the Menu and select New APN

Enter name: Telstra 3
APN: Telstra.mms
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002
MMS Proxy: 10.1.1.180
MMS Port: 80
MCC: 505
MNC: 11
Authentication type: None
APN type: mms

Keep the default values set by device for all blank fields shown above.

For Allview P8 Energy, when you type Telstra APN settings, make sure you enter APN settings in correct case. For example, if you are entering Telstra Internet & MMS APN settings make sure you enter APN as telstra.iph and not as TELSTRA.IPH or Telstra.iph. If entering Telstra APN Settings above to your Allview P8 Energy, APN should be entered as telstra.internet and not as TELSTRA.INTERNET or Telstra.internet.

Telstra MCC-MNC values

505-01
505-11
505-71
505-72

Allview P8 Energy compatibility with Telstra

Allview P8 Energy is compatible with below network frequencies of Telstra.

3G
HSDPA Not compatible
4G
LTEBand 3 1800 MHz, Band 7 2600 MHz, Band 1 2100 MHz*
*These frequencies of Telstra may not have countrywide coverage for Allview P8 Energy.

Explain Allview P8 Energy compatibility with Telstra

Telstra 3G APN with Allview P8 Energy

Allview P8 Energy does not support Telstra 3G.

Telstra 4G LTE APN with Allview P8 Energy

Allview P8 Energy supports Telstra 4G on LTE Band 3 1800 MHz, Band 7 2600 MHz and Band 1 2100 MHz only in some areas of Australia.

Overall compatibililty of Allview P8 Energy with Telstra is 33%. The compatibility of Allview P8 Energy with Telstra, or the Telstra network support on Allview P8 Energy we have explained here is only a technical specification match between Allview P8 Energy and Telstra network. Even Allview P8 Energy is listed as compatible here, Telstra network can still disallow (sometimes) Allview P8 Energy in their network using IMEI ranges. Therefore, this only explains if Telstra allows Allview P8 Energy in their network, whether Allview P8 Energy will work properly or not, in which bands Allview P8 Energy will work on Telstra and the network performance between Telstra and Allview P8 Energy. To check if Allview P8 Energy is really allowed in Telstra network please contact Telstra support. Do not use this website to decide to buy Allview P8 Energy to use on Telstra.

Max download & upload speeds on Telstra 4G for Allview P8 Energy per LTE band

Band 3 1800 150.8 Mbps 51 Mbps
Band 7 2600 150.8 Mbps 51 Mbps

Allview P8 Energy network specifications

OS Android OS, v5.1 (Lollipop)
Network bands GSM / HSPA / LTE
Speed HSPA 21.1/5.76 Mbps, LTE Cat4 150/50 Mbps
Network frequencies GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2
HSDPA 900 / 1900 / 2100
LTE band 1(2100), 3(1800), 7(2600), 38(2600), 39(1900), 40(2300)
See full specs at GSM.COOL... Select a different device... Select a different network...
Allview P8 Energy mini Telstra APN settings
Not compatible
Allview P8 Energy Pro Telstra APN settings
33% compatible with Telstra
LTE