Australia
HSDPA
LTE
50%

Telstra APN settings for Allview V2 Viper S

      Telstra   Allview V2 Viper S   Android

Allview V2 Viper S is not compatible with Telstra HSDPA and compatible with Telstra LTE 50%.

Allview V2 Viper S does not appear to be fully compatible with Telstra at this time. It will only support Telstra 4G LTE only in certain areas of Australia. Please check the compatibility of Allview V2 Viper S with Telstra for more details.

To configure Telstra APN settings with Allview V2 Viper S follow below steps. Allview V2 Viper S maximum data transter speed with Telstra is 150.8/51 Mbps while Telstra is capable of speeds up to 300/100 Mbps.

Telstra Internet & MMS APN settings

Go to Settings More / Mobile networks Access Point Names

Press on right top

Name: Telstra 2
APN: telstra.iph
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002
MMS proxy: 10.1.1.180
MMS port: 80
MCC: 505
MNC: 01
Authentication type: none
APN type: default,supl,mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Do not change the default values set by device for all blank fields above.

Telstra Internet APN Settings

Go to Settings More / Mobile networks Access Point Names

Press on right top

Name: Telstra 1
APN: telstra.wap
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS proxy:
MMS port:
MCC: 505
MNC: 01
Authentication type: None
APN type: default,supl
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Do not change the default values set by device for all blank fields above.

Telstra MMS APN Settings

Go to Settings More / Mobile networks Access Point Names

Press on right top

Name: Telstra 3
APN: telstra.mms
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002/
MMS proxy: 10.1.1.180
MMS port: 80
MCC: 505
MNC: 01
Authentication type: None
APN type: mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Do not change the default values set by device for all blank fields above.

Telstra MMS APN Settings

Go to Settings More / Mobile networks Access Point Names

Press on right top

Name: Telstra 3
APN: Telstra.mms
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002
MMS proxy: 10.1.1.180
MMS port: 80
MCC: 505
MNC: 11
Authentication type: None
APN type: mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Do not change the default values set by device for all blank fields above.

For Allview V2 Viper S, when you type Telstra APN settings, make sure you enter APN settings in correct case. For example, if you are entering Telstra Internet & MMS APN settings make sure you enter APN as telstra.iph and not as TELSTRA.IPH or Telstra.iph. If entering Telstra APN Settings above to your Allview V2 Viper S, APN should be entered as telstra.internet and not as TELSTRA.INTERNET or Telstra.internet.

Telstra MCC-MNC values

505-01
505-11
505-71
505-72

Allview V2 Viper S compatibility with Telstra

Allview V2 Viper S is compatible with below network frequencies of Telstra.

3G
HSDPA Not compatible
4G
LTEBand 3 1800 MHz, Band 7 2600 MHz, Band 1 2100 MHz*
*These frequencies of Telstra may not have countrywide coverage for Allview V2 Viper S.

Explain Allview V2 Viper S compatibility with Telstra

Telstra 3G APN with Allview V2 Viper S

Allview V2 Viper S does not support Telstra 3G.

Telstra 4G LTE APN with Allview V2 Viper S

Allview V2 Viper S supports Telstra 4G on LTE Band 3 1800 MHz, Band 7 2600 MHz and Band 1 2100 MHz only in some areas of Australia.

Overall compatibililty of Allview V2 Viper S with Telstra is 33%. The compatibility of Allview V2 Viper S with Telstra, or the Telstra network support on Allview V2 Viper S we have explained here is only a technical specification match between Allview V2 Viper S and Telstra network. Even Allview V2 Viper S is listed as compatible here, Telstra network can still disallow (sometimes) Allview V2 Viper S in their network using IMEI ranges. Therefore, this only explains if Telstra allows Allview V2 Viper S in their network, whether Allview V2 Viper S will work properly or not, in which bands Allview V2 Viper S will work on Telstra and the network performance between Telstra and Allview V2 Viper S. To check if Allview V2 Viper S is really allowed in Telstra network please contact Telstra support. Do not use this website to decide to buy Allview V2 Viper S to use on Telstra.

Max download & upload speeds on Telstra 4G for Allview V2 Viper S per LTE band

Band 3 1800 150.8 Mbps 51 Mbps
Band 7 2600 150.8 Mbps 51 Mbps

Allview V2 Viper S network specifications

OS Android 6.0 (Marshmallow)
Network bands GSM / HSPA / LTE
Speed HSPA 21.1/5.76 Mbps, LTE Cat4 150/50 Mbps
Network frequencies GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2
HSDPA 900 / 2100
LTE band 1(2100), 3(1800), 7(2600), 20(800), 38(2600)
Select a different device... Select a different network...

Post reply

Name
Email
Device
Network