Telstra APN settings for Allview V2 Viper Xe
Allview V2 Viper Xe is not compatible with Telstra HSDPA and compatible with Telstra LTE 50%.
Allview V2 Viper Xe does not appear to be fully compatible with Telstra at this time. It will only support Telstra 4G LTE only in certain areas of Australia. Please check the compatibility of Allview V2 Viper Xe with Telstra for more details.
To configure Telstra APN settings with Allview V2 Viper Xe follow below steps. Allview V2 Viper Xe maximum data transter speed with Telstra is 150.8/51 Mbps while Telstra is capable of speeds up to 300/100 Mbps.
Telstra Internet & MMS APN settings
Go to Settings More / Mobile networks Access Point Names
Press on right top
Name: Telstra 2
APN: telstra.iph
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002
MMS proxy: 10.1.1.180
MMS port: 80
MCC: 505
MNC: 01
Authentication type: none
APN type: default,supl,mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set
Do not change the default values set by device for all blank fields above.
Telstra Internet APN Settings
Go to Settings More / Mobile networks Access Point Names
Press on right top
Name: Telstra 1
APN: telstra.wap
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS proxy:
MMS port:
MCC: 505
MNC: 01
Authentication type: None
APN type: default,supl
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set
Do not change the default values set by device for all blank fields above.
Telstra MMS APN Settings
Go to Settings More / Mobile networks Access Point Names
Press on right top
Name: Telstra 3
APN: telstra.mms
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002/
MMS proxy: 10.1.1.180
MMS port: 80
MCC: 505
MNC: 01
Authentication type: None
APN type: mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set
Do not change the default values set by device for all blank fields above.
Telstra MMS APN Settings
Go to Settings More / Mobile networks Access Point Names
Press on right top
Name: Telstra 3
APN: Telstra.mms
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002
MMS proxy: 10.1.1.180
MMS port: 80
MCC: 505
MNC: 11
Authentication type: None
APN type: mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set
Do not change the default values set by device for all blank fields above.
For Allview V2 Viper Xe, when you type Telstra APN settings, make sure you enter APN settings in correct case. For example, if you are entering Telstra Internet & MMS APN settings make sure you enter APN as telstra.iph and not as TELSTRA.IPH or Telstra.iph. If entering Telstra APN Settings above to your Allview V2 Viper Xe, APN should be entered as telstra.internet and not as TELSTRA.INTERNET or Telstra.internet.
Telstra MCC-MNC values
Allview V2 Viper Xe compatibility with Telstra
Allview V2 Viper Xe is compatible with below network frequencies of Telstra.
3G | HSDPA | Not compatible |
4G | LTE | Band 3 1800 MHz, Band 7 2600 MHz, Band 1 2100 MHz* |
Explain Allview V2 Viper Xe compatibility with Telstra
Telstra 3G APN with Allview V2 Viper Xe
Allview V2 Viper Xe does not support Telstra 3G.
Telstra 4G LTE APN with Allview V2 Viper Xe
Allview V2 Viper Xe supports Telstra 4G on LTE Band 3 1800 MHz, Band 7 2600 MHz and Band 1 2100 MHz only in some areas of Australia.
Overall compatibililty of Allview V2 Viper Xe with Telstra is 33%. The compatibility of Allview V2 Viper Xe with Telstra, or the Telstra network support on Allview V2 Viper Xe we have explained here is only a technical specification match between Allview V2 Viper Xe and Telstra network. Even Allview V2 Viper Xe is listed as compatible here, Telstra network can still disallow (sometimes) Allview V2 Viper Xe in their network using IMEI ranges. Therefore, this only explains if Telstra allows Allview V2 Viper Xe in their network, whether Allview V2 Viper Xe will work properly or not, in which bands Allview V2 Viper Xe will work on Telstra and the network performance between Telstra and Allview V2 Viper Xe. To check if Allview V2 Viper Xe is really allowed in Telstra network please contact Telstra support. Do not use this website to decide to buy Allview V2 Viper Xe to use on Telstra.
Max download & upload speeds on Telstra 4G for Allview V2 Viper Xe per LTE band
| Band 3 1800 | 150.8 Mbps | 51 Mbps | |
| Band 7 2600 | 150.8 Mbps | 51 Mbps |
Allview V2 Viper Xe network specifications
| OS | Android 6.0 (Marshmallow) |
| Network bands | GSM / HSPA / LTE |
| Speed | HSPA 21.1/5.76 Mbps, LTE Cat4 150/50 Mbps |
| Network frequencies | GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2 HSDPA 900 / 1900 / 2100 LTE band 1(2100), 3(1800), 7(2600), 8(900), 20(800), 38(2600), 39(1900), 40(2300), 41(2500) |
