Australia
HSDPA
LTE
50%

Telstra APN settings for Lava Z60

      Telstra   Lava Z60   Android

Lava Z60 is not compatible with Telstra HSDPA and compatible with Telstra LTE 50%.

Lava Z60 does not appear to be fully compatible with Telstra at this time. It will only support Telstra 4G LTE only in certain areas of Australia. Please check the compatibility of Lava Z60 with Telstra for more details.

To configure Telstra APN settings with Lava Z60 follow below steps. Lava Z60 maximum data transter speed with Telstra is 150.8/51 Mbps while Telstra is capable of speeds up to 300/100 Mbps.

Telstra Internet & MMS APN settings

Go to Settings More Mobile networks Access Point Names of your Lava Z60

Press on right top corner.

Name: Telstra 2
APN: telstra.iph
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002
MMS proxy: 10.1.1.180
MMS port: 80
MCC: 505
MNC: 01
Authentication type: none
APN type: default,supl,mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Do not change the default values set by device for all blank fields above. Restart Lava Z60.

Telstra Internet APN Settings

Go to Settings More Mobile networks Access Point Names of your Lava Z60

Press on right top corner.

Name: Telstra 1
APN: telstra.wap
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS proxy:
MMS port:
MCC: 505
MNC: 01
Authentication type: None
APN type: default,supl
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Do not change the default values set by device for all blank fields above. Restart Lava Z60.

Telstra MMS APN Settings

Go to Settings More Mobile networks Access Point Names of your Lava Z60

Press on right top corner.

Name: Telstra 3
APN: telstra.mms
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002/
MMS proxy: 10.1.1.180
MMS port: 80
MCC: 505
MNC: 01
Authentication type: None
APN type: mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Do not change the default values set by device for all blank fields above. Restart Lava Z60.

Telstra MMS APN Settings

Go to Settings More Mobile networks Access Point Names of your Lava Z60

Press on right top corner.

Name: Telstra 3
APN: Telstra.mms
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002
MMS proxy: 10.1.1.180
MMS port: 80
MCC: 505
MNC: 11
Authentication type: None
APN type: mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Do not change the default values set by device for all blank fields above. Restart Lava Z60.

For Lava Z60, when you type Telstra APN settings, make sure you enter APN settings in correct case. For example, if you are entering Telstra Internet & MMS APN settings make sure you enter APN as telstra.iph and not as TELSTRA.IPH or Telstra.iph. If entering Telstra APN Settings above to your Lava Z60, APN should be entered as telstra.internet and not as TELSTRA.INTERNET or Telstra.internet.

Telstra MCC-MNC values

505-01
505-11
505-71
505-72

Lava Z60 compatibility with Telstra

Lava Z60 is compatible with below network frequencies of Telstra.

3G
HSDPA Not compatible
4G
LTEBand 3 1800 MHz, Band 1 2100 MHz*
*These frequencies of Telstra may not have countrywide coverage for Lava Z60.

Explain Lava Z60 compatibility with Telstra

Telstra 3G APN with Lava Z60

Lava Z60 does not support Telstra 3G.

Telstra 4G LTE APN with Lava Z60

Lava Z60 supports Telstra 4G on LTE Band 3 1800 MHz and Band 1 2100 MHz only in some areas of Australia.

Overall compatibililty of Lava Z60 with Telstra is 33%. The compatibility of Lava Z60 with Telstra, or the Telstra network support on Lava Z60 we have explained here is only a technical specification match between Lava Z60 and Telstra network. Even Lava Z60 is listed as compatible here, Telstra network can still disallow (sometimes) Lava Z60 in their network using IMEI ranges. Therefore, this only explains if Telstra allows Lava Z60 in their network, whether Lava Z60 will work properly or not, in which bands Lava Z60 will work on Telstra and the network performance between Telstra and Lava Z60. To check if Lava Z60 is really allowed in Telstra network please contact Telstra support. Do not use this website to decide to buy Lava Z60 to use on Telstra.

Max download & upload speeds on Telstra 4G for Lava Z60 per LTE band

Band 3 1800 150.8 Mbps 51 Mbps

Lava Z60 network specifications

OS Android 7.0 (Nougat)
Network bands GSM / HSPA / LTE
Speed HSPA 42.2/5.76 Mbps, LTE Cat4 150/50 Mbps
Network frequencies GSM 900 / 1800 - SIM 1 & SIM 2
HSDPA 900 / 2100
LTE band 1(2100), 3(1800), 5(850), 40(2300), 41(2500)
Select a different device... Select a different network...

Post reply

Name
Email
Device
Network