Telstra APN settings for TECNO Spark 3 Pro
TECNO Spark 3 Pro is compatible with Telstra HSDPA and Telstra LTE 50%.
To configure Telstra APN settings with TECNO Spark 3 Pro follow below steps. TECNO Spark 3 Pro maximum data transter speed with Telstra is 150.8/51 Mbps while Telstra is capable of speeds up to 300/100 Mbps.
Telstra Internet & MMS APN settings
Open Settings Connections Mobile networks Access Point Names of your TECNO Spark 3 Pro.
Press ADD on right top corner. If TECNO Spark 3 Pro has already set values for Telstra 2 for any fields below leave them. Change the other fields as below.
Name: Telstra 2
APN: telstra.iph
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002
MMS proxy: 10.1.1.180
MMS port: 80
MCC: 505
MNC: 01
Authentication type: none
APN type: default,supl,mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set
Restart TECNO Spark 3 Pro to apply new Telstra 2 APN settings.
Telstra Internet APN Settings
Open Settings Connections Mobile networks Access Point Names of your TECNO Spark 3 Pro.
Press ADD on right top corner. If TECNO Spark 3 Pro has already set values for Telstra 1 for any fields below leave them. Change the other fields as below.
Name: Telstra 1
APN: telstra.wap
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS proxy:
MMS port:
MCC: 505
MNC: 01
Authentication type: None
APN type: default,supl
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set
Restart TECNO Spark 3 Pro to apply new Telstra 1 APN settings.
Telstra MMS APN Settings
Open Settings Connections Mobile networks Access Point Names of your TECNO Spark 3 Pro.
Press ADD on right top corner. If TECNO Spark 3 Pro has already set values for Telstra 3 for any fields below leave them. Change the other fields as below.
Name: Telstra 3
APN: telstra.mms
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002/
MMS proxy: 10.1.1.180
MMS port: 80
MCC: 505
MNC: 01
Authentication type: None
APN type: mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set
Restart TECNO Spark 3 Pro to apply new Telstra 3 APN settings.
Telstra MMS APN Settings
Open Settings Connections Mobile networks Access Point Names of your TECNO Spark 3 Pro.
Press ADD on right top corner. If TECNO Spark 3 Pro has already set values for Telstra 3 for any fields below leave them. Change the other fields as below.
Name: Telstra 3
APN: Telstra.mms
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002
MMS proxy: 10.1.1.180
MMS port: 80
MCC: 505
MNC: 11
Authentication type: None
APN type: mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set
Restart TECNO Spark 3 Pro to apply new Telstra 3 APN settings.
For TECNO Spark 3 Pro, when you type Telstra APN settings, make sure you enter APN settings in correct case. For example, if you are entering Telstra Internet & MMS APN settings make sure you enter APN as telstra.iph and not as TELSTRA.IPH or Telstra.iph. If entering Telstra APN Settings above to your TECNO Spark 3 Pro, APN should be entered as telstra.internet and not as TELSTRA.INTERNET or Telstra.internet.
Telstra MCC-MNC values
TECNO Spark 3 Pro compatibility with Telstra
TECNO Spark 3 Pro is compatible with below network frequencies of Telstra.
3G | HSDPA | 850 MHz |
4G | LTE | Band 3 1800 MHz, Band 1 2100 MHz* |
| Band 3 1800 MHz, Band 7 2600 MHz* |
Explain TECNO Spark 3 Pro compatibility with Telstra
TECNO Spark 3 Pro has modal variants v2.
Telstra 3G APN with TECNO Spark 3 Pro
TECNO Spark 3 Pro supports Telstra 3G on HSDPA 850 MHz.
Telstra 4G LTE APN with TECNO Spark 3 Pro
Compatibility of TECNO Spark 3 Pro with Telstra 4G depends on the modal variants and v2.
TECNO Spark 3 Pro supports Telstra 4G on LTE Band 3 1800 MHz and Band 1 2100 MHz only in some areas of Australia.
v2
TECNO Spark 3 Pro v2 supports Telstra 4G on LTE Band 3 1800 MHz and Band 7 2600 MHz only in some areas of Australia.
Overall compatibililty of TECNO Spark 3 Pro with Telstra is 67%. The compatibility of TECNO Spark 3 Pro with Telstra, or the Telstra network support on TECNO Spark 3 Pro we have explained here is only a technical specification match between TECNO Spark 3 Pro and Telstra network. Even TECNO Spark 3 Pro is listed as compatible here, Telstra network can still disallow (sometimes) TECNO Spark 3 Pro in their network using IMEI ranges. Therefore, this only explains if Telstra allows TECNO Spark 3 Pro in their network, whether TECNO Spark 3 Pro will work properly or not, in which bands TECNO Spark 3 Pro will work on Telstra and the network performance between Telstra and TECNO Spark 3 Pro. To check if TECNO Spark 3 Pro is really allowed in Telstra network please contact Telstra support. Do not use this website to decide to buy TECNO Spark 3 Pro to use on Telstra.
Max download & upload speeds on Telstra 4G for TECNO Spark 3 Pro per LTE band
| Band 3 1800 | 150.8 Mbps | 51 Mbps | |
| Band 3 1800 | v2 | 150.8 Mbps | 51 Mbps |
| Band 7 2600 | v2 | 150.8 Mbps | 51 Mbps |
TECNO Spark 3 Pro network specifications
| OS | Android 9.0 (Pie), HIOS 5.0 |
| Network bands | GSM / HSPA / LTE |
| Speed | HSPA 42.2/5.76 Mbps, LTE Cat4 150/50 Mbps |
| Network frequencies | GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2 HSDPA 850 / 900 / 2100 LTE band 1(2100), 3(1800), 5(850), 8(900), 38(2600), 40(2300), 41(2500) LTE band 3(1800), 7(2600), 20(800) |
