Australia
HSDPA
LTE
50%

Telstra APN settings for TECNO Spark Go

, Updated:       Telstra   TECNO Spark Go   Android

TECNO Spark Go is compatible with Telstra HSDPA and Telstra LTE 50%.

To configure Telstra APN settings with TECNO Spark Go follow below steps. TECNO Spark Go maximum data transter speed with Telstra is 150.8/51 Mbps while Telstra is capable of speeds up to 300/100 Mbps.

Telstra Internet & MMS APN settings

Open Settings Connections Mobile networks Access Point Names of your TECNO Spark Go.

Press ADD on right top corner. If TECNO Spark Go has already set values for Telstra 2 for any fields below leave them. Change the other fields as below.

Name: Telstra 2
APN: telstra.iph
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002
MMS proxy: 10.1.1.180
MMS port: 80
MCC: 505
MNC: 01
Authentication type: none
APN type: default,supl,mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Telstra 2 APN settings for Android 9 screenshot

Restart TECNO Spark Go to apply new Telstra 2 APN settings.

Telstra Internet APN Settings

Open Settings Connections Mobile networks Access Point Names of your TECNO Spark Go.

Press ADD on right top corner. If TECNO Spark Go has already set values for Telstra 1 for any fields below leave them. Change the other fields as below.

Name: Telstra 1
APN: telstra.wap
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS proxy:
MMS port:
MCC: 505
MNC: 01
Authentication type: None
APN type: default,supl
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Telstra 1 APN settings for Android 9 screenshot

Restart TECNO Spark Go to apply new Telstra 1 APN settings.

Telstra MMS APN Settings

Open Settings Connections Mobile networks Access Point Names of your TECNO Spark Go.

Press ADD on right top corner. If TECNO Spark Go has already set values for Telstra 3 for any fields below leave them. Change the other fields as below.

Name: Telstra 3
APN: telstra.mms
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002/
MMS proxy: 10.1.1.180
MMS port: 80
MCC: 505
MNC: 01
Authentication type: None
APN type: mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Telstra 3 APN settings for Android 9 screenshot

Restart TECNO Spark Go to apply new Telstra 3 APN settings.

Telstra MMS APN Settings

Open Settings Connections Mobile networks Access Point Names of your TECNO Spark Go.

Press ADD on right top corner. If TECNO Spark Go has already set values for Telstra 3 for any fields below leave them. Change the other fields as below.

Name: Telstra 3
APN: Telstra.mms
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002
MMS proxy: 10.1.1.180
MMS port: 80
MCC: 505
MNC: 11
Authentication type: None
APN type: mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Telstra 3 APN settings for Android 9 screenshot

Restart TECNO Spark Go to apply new Telstra 3 APN settings.

For TECNO Spark Go, when you type Telstra APN settings, make sure you enter APN settings in correct case. For example, if you are entering Telstra Internet & MMS APN settings make sure you enter APN as telstra.iph and not as TELSTRA.IPH or Telstra.iph. If entering Telstra APN Settings above to your TECNO Spark Go, APN should be entered as telstra.internet and not as TELSTRA.INTERNET or Telstra.internet.

Telstra MCC-MNC values

505-01
505-11
505-71
505-72

TECNO Spark Go compatibility with Telstra

TECNO Spark Go is compatible with below network frequencies of Telstra.

3G
HSDPA850 MHz
4G
LTEBand 3 1800 MHz, Band 1 2100 MHz*
*These frequencies of Telstra may not have countrywide coverage for TECNO Spark Go.

Explain TECNO Spark Go compatibility with Telstra

Telstra 3G APN with TECNO Spark Go

TECNO Spark Go supports Telstra 3G on HSDPA 850 MHz.

Telstra 4G LTE APN with TECNO Spark Go

TECNO Spark Go supports Telstra 4G on LTE Band 3 1800 MHz and Band 1 2100 MHz only in some areas of Australia.

Overall compatibililty of TECNO Spark Go with Telstra is 67%. The compatibility of TECNO Spark Go with Telstra, or the Telstra network support on TECNO Spark Go we have explained here is only a technical specification match between TECNO Spark Go and Telstra network. Even TECNO Spark Go is listed as compatible here, Telstra network can still disallow (sometimes) TECNO Spark Go in their network using IMEI ranges. Therefore, this only explains if Telstra allows TECNO Spark Go in their network, whether TECNO Spark Go will work properly or not, in which bands TECNO Spark Go will work on Telstra and the network performance between Telstra and TECNO Spark Go. To check if TECNO Spark Go is really allowed in Telstra network please contact Telstra support. Do not use this website to decide to buy TECNO Spark Go to use on Telstra.

Max download & upload speeds on Telstra 4G for TECNO Spark Go per LTE band

Band 3 1800 150.8 Mbps 51 Mbps

TECNO Spark Go network specifications

OS Android 9.0 (Pie), HIOS 5.0
Network bands GSM / HSPA / LTE
Speed HSPA 42.2/5.76 Mbps, LTE Cat4 150/50 Mbps
Network frequencies GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2
HSDPA 850 / 900 / 2100
LTE band 1(2100), 3(1800), 5(850), 8(900), 38(2600), 40(2300), 41(2500)
See full specs at GSM.COOL... Select a different device... Select a different network...
TECNO Spark Telstra APN settings
Not compatible
TECNO Spark 2 Telstra APN settings
Not compatible
TECNO Spark 3 Telstra APN settings
100% compatible with Telstra
HSDPA
TECNO Spark CM Telstra APN settings
67% compatible with Telstra
HSDPA   LTE
TECNO Spark Pro Telstra APN settings
33% compatible with Telstra
LTE