Telstra APN settings for Wiko View2 Go
Wiko View2 Go is compatible with Telstra HSDPA and Telstra LTE 50%.
To configure Telstra APN settings with Wiko View2 Go follow below steps. Wiko View2 Go maximum data transter speed with Telstra is 150.8/51 Mbps while Telstra is capable of speeds up to 300/100 Mbps.
Telstra Internet & MMS APN settings
In your Wiko View2 Go app drawer, go to Settings Connections Mobile networks Access Point Names
Add a new APN by pressing ADD on right top corner. If Wiko View2 Go has already set values for Telstra 2 for any fields below leave them. Change others as below.
Name: Telstra 2
APN: telstra.iph
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002
MMS proxy: 10.1.1.180
MMS port: 80
MCC: 505
MNC: 01
Authentication type: none
APN type: default,supl,mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set
Restart your Wiko View2 Go to apply Telstra 2 APN settings.
Telstra Internet APN Settings
In your Wiko View2 Go app drawer, go to Settings Connections Mobile networks Access Point Names
Add a new APN by pressing ADD on right top corner. If Wiko View2 Go has already set values for Telstra 1 for any fields below leave them. Change others as below.
Name: Telstra 1
APN: telstra.wap
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS proxy:
MMS port:
MCC: 505
MNC: 01
Authentication type: None
APN type: default,supl
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set
Restart your Wiko View2 Go to apply Telstra 1 APN settings.
Telstra MMS APN Settings
In your Wiko View2 Go app drawer, go to Settings Connections Mobile networks Access Point Names
Add a new APN by pressing ADD on right top corner. If Wiko View2 Go has already set values for Telstra 3 for any fields below leave them. Change others as below.
Name: Telstra 3
APN: telstra.mms
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002/
MMS proxy: 10.1.1.180
MMS port: 80
MCC: 505
MNC: 01
Authentication type: None
APN type: mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set
Restart your Wiko View2 Go to apply Telstra 3 APN settings.
Telstra MMS APN Settings
In your Wiko View2 Go app drawer, go to Settings Connections Mobile networks Access Point Names
Add a new APN by pressing ADD on right top corner. If Wiko View2 Go has already set values for Telstra 3 for any fields below leave them. Change others as below.
Name: Telstra 3
APN: Telstra.mms
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002
MMS proxy: 10.1.1.180
MMS port: 80
MCC: 505
MNC: 11
Authentication type: None
APN type: mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set
Restart your Wiko View2 Go to apply Telstra 3 APN settings.
For Wiko View2 Go, when you type Telstra APN settings, make sure you enter APN settings in correct case. For example, if you are entering Telstra Internet & MMS APN settings make sure you enter APN as telstra.iph and not as TELSTRA.IPH or Telstra.iph. If entering Telstra APN Settings above to your Wiko View2 Go, APN should be entered as telstra.internet and not as TELSTRA.INTERNET or Telstra.internet.
Telstra MCC-MNC values
Wiko View2 Go compatibility with Telstra
Wiko View2 Go is compatible with below network frequencies of Telstra.
3G | HSDPA | 850 MHz |
4G | LTE | Band 3 1800 MHz, Band 7 2600 MHz, Band 1 2100 MHz* |
Explain Wiko View2 Go compatibility with Telstra
Telstra 3G APN with Wiko View2 Go
Wiko View2 Go supports Telstra 3G on HSDPA 850 MHz.
Telstra 4G LTE APN with Wiko View2 Go
Wiko View2 Go supports Telstra 4G on LTE Band 3 1800 MHz, Band 7 2600 MHz and Band 1 2100 MHz only in some areas of Australia.
Overall compatibililty of Wiko View2 Go with Telstra is 67%. The compatibility of Wiko View2 Go with Telstra, or the Telstra network support on Wiko View2 Go we have explained here is only a technical specification match between Wiko View2 Go and Telstra network. Even Wiko View2 Go is listed as compatible here, Telstra network can still disallow (sometimes) Wiko View2 Go in their network using IMEI ranges. Therefore, this only explains if Telstra allows Wiko View2 Go in their network, whether Wiko View2 Go will work properly or not, in which bands Wiko View2 Go will work on Telstra and the network performance between Telstra and Wiko View2 Go. To check if Wiko View2 Go is really allowed in Telstra network please contact Telstra support. Do not use this website to decide to buy Wiko View2 Go to use on Telstra.
Max download & upload speeds on Telstra 4G for Wiko View2 Go per LTE band
| Band 3 1800 | 150.8 Mbps | 51 Mbps | |
| Band 7 2600 | 150.8 Mbps | 51 Mbps |
Wiko View2 Go network specifications
| OS | Android 8.1 (Oreo) |
| Network bands | GSM / HSPA / LTE |
| Speed | HSPA 42.2/11.5 Mbps, LTE Cat4 150/50 Mbps |
| Network frequencies | GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2 HSDPA 850 / 900 / 1900 / 2100 LTE band 1(2100), 3(1800), 7(2600), 20(800) |
