Australia
HSDPA
LTE
50%

Telstra APN settings for Wiko WIM Lite

, Updated:       Telstra   Wiko WIM Lite   Android

Wiko WIM Lite is compatible with Telstra HSDPA and Telstra LTE 50%.

To configure Telstra APN settings with Wiko WIM Lite follow below steps. Wiko WIM Lite maximum data transter speed with Telstra is 300/51 Mbps while Telstra is capable of speeds up to 301.5/100 Mbps.

Telstra Internet & MMS APN settings

Go to Settings More Mobile networks Access Point Names of your Wiko WIM Lite

Press on right top corner.

Name: Telstra 2
APN: telstra.iph
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002
MMS proxy: 10.1.1.180
MMS port: 80
MCC: 505
MNC: 01
Authentication type: none
APN type: default,supl,mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Do not change the default values set by device for all blank fields above. Restart Wiko WIM Lite.

Telstra Internet APN Settings

Go to Settings More Mobile networks Access Point Names of your Wiko WIM Lite

Press on right top corner.

Name: Telstra 1
APN: telstra.wap
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS proxy:
MMS port:
MCC: 505
MNC: 01
Authentication type: None
APN type: default,supl
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Do not change the default values set by device for all blank fields above. Restart Wiko WIM Lite.

Telstra MMS APN Settings

Go to Settings More Mobile networks Access Point Names of your Wiko WIM Lite

Press on right top corner.

Name: Telstra 3
APN: telstra.mms
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002/
MMS proxy: 10.1.1.180
MMS port: 80
MCC: 505
MNC: 01
Authentication type: None
APN type: mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Do not change the default values set by device for all blank fields above. Restart Wiko WIM Lite.

Telstra MMS APN Settings

Go to Settings More Mobile networks Access Point Names of your Wiko WIM Lite

Press on right top corner.

Name: Telstra 3
APN: Telstra.mms
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002
MMS proxy: 10.1.1.180
MMS port: 80
MCC: 505
MNC: 11
Authentication type: None
APN type: mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Do not change the default values set by device for all blank fields above. Restart Wiko WIM Lite.

For Wiko WIM Lite, when you type Telstra APN settings, make sure you enter APN settings in correct case. For example, if you are entering Telstra Internet & MMS APN settings make sure you enter APN as telstra.iph and not as TELSTRA.IPH or Telstra.iph. If entering Telstra APN Settings above to your Wiko WIM Lite, APN should be entered as telstra.internet and not as TELSTRA.INTERNET or Telstra.internet.

Telstra MCC-MNC values

505-01
505-11
505-71
505-72

Wiko WIM Lite compatibility with Telstra

Wiko WIM Lite is compatible with below network frequencies of Telstra.

3G
HSDPA850 MHz
4G
LTEBand 3 1800 MHz, Band 7 2600 MHz, Band 1 2100 MHz*
*These frequencies of Telstra may not have countrywide coverage for Wiko WIM Lite.

Explain Wiko WIM Lite compatibility with Telstra

Telstra 3G APN with Wiko WIM Lite

Wiko WIM Lite supports Telstra 3G on HSDPA 850 MHz.

Telstra 4G LTE APN with Wiko WIM Lite

Wiko WIM Lite supports Telstra 4G on LTE Band 3 1800 MHz, Band 7 2600 MHz and Band 1 2100 MHz only in some areas of Australia.

Overall compatibililty of Wiko WIM Lite with Telstra is 67%. The compatibility of Wiko WIM Lite with Telstra, or the Telstra network support on Wiko WIM Lite we have explained here is only a technical specification match between Wiko WIM Lite and Telstra network. Even Wiko WIM Lite is listed as compatible here, Telstra network can still disallow (sometimes) Wiko WIM Lite in their network using IMEI ranges. Therefore, this only explains if Telstra allows Wiko WIM Lite in their network, whether Wiko WIM Lite will work properly or not, in which bands Wiko WIM Lite will work on Telstra and the network performance between Telstra and Wiko WIM Lite. To check if Wiko WIM Lite is really allowed in Telstra network please contact Telstra support. Do not use this website to decide to buy Wiko WIM Lite to use on Telstra.

Max download & upload speeds on Telstra 4G for Wiko WIM Lite per LTE band

Band 3 1800 300 Mbps 51 Mbps
Band 7 2600 300 Mbps 51 Mbps

Wiko WIM Lite network specifications

OS Android 7.1 (Nougat)
Network bands GSM / HSPA / LTE
Speed HSPA 42.2/5.76 Mbps, LTE-A (2CA) Cat6 300/50 Mbps
Network frequencies GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2
HSDPA 850 / 900 / 1900 / 2100
LTE band 1(2100), 3(1800), 7(2600), 8(900), 20(800)
See full specs at GSM.COOL... Select a different device... Select a different network...