Australia
HSDPA
LTE
50%

Telstra APN settings for Xiaomi Mi 6

, Updated:       Telstra   Xiaomi Mi 6   Android

Xiaomi Mi 6 is compatible with Telstra HSDPA and Telstra LTE 50%.

To configure Telstra APN settings with Xiaomi Mi 6 follow below steps. Xiaomi Mi 6 maximum data transter speed with Telstra is 300/51 Mbps while Telstra is capable of speeds up to 452.2/100 Mbps.

Telstra Internet & MMS APN settings

In your Xiaomi Mi 6 with MIUI, go to Settings  SIM cards and mobile networks
Select the SIM card which you want to configure APN settings
Select Access point names

Select Add new

Name: Telstra 2
APN: telstra.iph
APN type: default,supl,mms
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002
MMS proxy: 10.1.1.180
MMS port: 80
MCC: 505
MNC: 01
Authentication type: none
APN protocol: IPv4
Bearer:
MVNO type:
MVNO value:

Keep the default values set by Xiaomi Mi 6 MIUI for all blank fields above. Restart the Xiaomi Mi 6 to apply Telstra 2 APN settings.

Telstra Internet APN Settings

In your Xiaomi Mi 6 with MIUI, go to Settings  SIM cards and mobile networks
Select the SIM card which you want to configure APN settings
Select Access point names

Select Add new

Name: Telstra 1
APN: telstra.wap
APN type: default,supl
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS proxy:
MMS port:
MCC: 505
MNC: 01
Authentication type: None
APN protocol: IPv4
Bearer:
MVNO type:
MVNO value:

Keep the default values set by Xiaomi Mi 6 MIUI for all blank fields above. Restart the Xiaomi Mi 6 to apply Telstra 1 APN settings.

Telstra MMS APN Settings

In your Xiaomi Mi 6 with MIUI, go to Settings  SIM cards and mobile networks
Select the SIM card which you want to configure APN settings
Select Access point names

Select Add new

Name: Telstra 3
APN: telstra.mms
APN type: mms
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002/
MMS proxy: 10.1.1.180
MMS port: 80
MCC: 505
MNC: 01
Authentication type: None
APN protocol: IPv4
Bearer:
MVNO type:
MVNO value:

Keep the default values set by Xiaomi Mi 6 MIUI for all blank fields above. Restart the Xiaomi Mi 6 to apply Telstra 3 APN settings.

Telstra MMS APN Settings

In your Xiaomi Mi 6 with MIUI, go to Settings  SIM cards and mobile networks
Select the SIM card which you want to configure APN settings
Select Access point names

Select Add new

Name: Telstra 3
APN: Telstra.mms
APN type: mms
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002
MMS proxy: 10.1.1.180
MMS port: 80
MCC: 505
MNC: 11
Authentication type: None
APN protocol: IPv4
Bearer:
MVNO type:
MVNO value:

Keep the default values set by Xiaomi Mi 6 MIUI for all blank fields above. Restart the Xiaomi Mi 6 to apply Telstra 3 APN settings.

For Xiaomi Mi 6, when you type Telstra APN settings, make sure you enter APN settings in correct case. For example, if you are entering Telstra Internet & MMS APN settings make sure you enter APN as telstra.iph and not as TELSTRA.IPH or Telstra.iph. If entering Telstra APN Settings above to your Xiaomi Mi 6, APN should be entered as telstra.internet and not as TELSTRA.INTERNET or Telstra.internet.

Telstra MCC-MNC values

505-01
505-11
505-71
505-72

Xiaomi Mi 6 compatibility with Telstra

Xiaomi Mi 6 is compatible with below network frequencies of Telstra.

3G
HSDPA850 MHz
4G
LTEBand 3 1800 MHz, Band 7 2600 MHz, Band 1 2100 MHz*
*These frequencies of Telstra may not have countrywide coverage for Xiaomi Mi 6.

Explain Xiaomi Mi 6 compatibility with Telstra

Telstra 3G APN with Xiaomi Mi 6

Xiaomi Mi 6 supports Telstra 3G on HSDPA 850 MHz.

Telstra 4G LTE APN with Xiaomi Mi 6

Xiaomi Mi 6 supports Telstra 4G on LTE Band 3 1800 MHz, Band 7 2600 MHz and Band 1 2100 MHz only in some areas of Australia.

Overall compatibililty of Xiaomi Mi 6 with Telstra is 67%. The compatibility of Xiaomi Mi 6 with Telstra, or the Telstra network support on Xiaomi Mi 6 we have explained here is only a technical specification match between Xiaomi Mi 6 and Telstra network. Even Xiaomi Mi 6 is listed as compatible here, Telstra network can still disallow (sometimes) Xiaomi Mi 6 in their network using IMEI ranges. Therefore, this only explains if Telstra allows Xiaomi Mi 6 in their network, whether Xiaomi Mi 6 will work properly or not, in which bands Xiaomi Mi 6 will work on Telstra and the network performance between Telstra and Xiaomi Mi 6. To check if Xiaomi Mi 6 is really allowed in Telstra network please contact Telstra support. Do not use this website to decide to buy Xiaomi Mi 6 to use on Telstra.

Max download & upload speeds on Telstra 4G for Xiaomi Mi 6 per LTE band

Band 3 1800 300 Mbps 51 Mbps
Band 7 2600 300 Mbps 51 Mbps

Xiaomi Mi 6 network specifications

OS Android 7.1.1 (Nougat)
Network bands GSM / CDMA / HSPA / EVDO / LTE
Speed HSPA 42.2/5.76 Mbps, LTE-A (3CA) Cat9 450/50 Mbps
Network frequencies GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2
HSDPA 850 / 900 / 1900 / 2100
LTE band 1(2100), 3(1800), 5(850), 7(2600), 8(900), 38(2600), 39(1900), 40(2300), 41(2500)
CDMA2000 1xEV-DO CDMA 800
See full specs at GSM.COOL... Select a different device... Select a different network...
Xiaomi Mi 6 Plus Telstra APN settings
67% compatible with Telstra
HSDPA   LTE
Xiaomi Mi 4 Telstra APN settings
Not compatible
Xiaomi Mi 7 Telstra APN settings
67% compatible with Telstra
HSDPA   LTE
Xiaomi Mi 8 Telstra APN settings
67% compatible with Telstra
HSDPA   LTE
Xiaomi Mi 9 Telstra APN settings
100% compatible with Telstra
HSDPA   LTE
Xiaomi Mi 4c Telstra APN settings
67% compatible with Telstra
HSDPA   LTE
Xiaomi Mi 4i Telstra APN settings
67% compatible with Telstra
HSDPA   LTE
Xiaomi Mi 4s Telstra APN settings
67% compatible with Telstra
HSDPA   LTE
Xiaomi Mi 5c Telstra APN settings
Not compatible