Australia
HSDPA
LTE
50%

Telstra APN settings for YU Yunique 2

, Updated:       Telstra   YU Yunique 2   Android

YU Yunique 2 is not compatible with Telstra HSDPA and compatible with Telstra LTE 50%.

YU Yunique 2 does not appear to be fully compatible with Telstra at this time. It will only support Telstra 4G LTE only in certain areas of Australia. Please check the compatibility of YU Yunique 2 with Telstra for more details.

To configure Telstra APN settings with YU Yunique 2 follow below steps. YU Yunique 2 maximum data transter speed with Telstra is 150.8/51 Mbps while Telstra is capable of speeds up to 300/100 Mbps.

Telstra Internet & MMS APN settings

Go to Settings More Mobile networks Access Point Names of your YU Yunique 2

Press on right top corner.

Name: Telstra 2
APN: telstra.iph
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002
MMS proxy: 10.1.1.180
MMS port: 80
MCC: 505
MNC: 01
Authentication type: none
APN type: default,supl,mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Do not change the default values set by device for all blank fields above. Restart YU Yunique 2.

Telstra Internet APN Settings

Go to Settings More Mobile networks Access Point Names of your YU Yunique 2

Press on right top corner.

Name: Telstra 1
APN: telstra.wap
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS proxy:
MMS port:
MCC: 505
MNC: 01
Authentication type: None
APN type: default,supl
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Do not change the default values set by device for all blank fields above. Restart YU Yunique 2.

Telstra MMS APN Settings

Go to Settings More Mobile networks Access Point Names of your YU Yunique 2

Press on right top corner.

Name: Telstra 3
APN: telstra.mms
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002/
MMS proxy: 10.1.1.180
MMS port: 80
MCC: 505
MNC: 01
Authentication type: None
APN type: mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Do not change the default values set by device for all blank fields above. Restart YU Yunique 2.

Telstra MMS APN Settings

Go to Settings More Mobile networks Access Point Names of your YU Yunique 2

Press on right top corner.

Name: Telstra 3
APN: Telstra.mms
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002
MMS proxy: 10.1.1.180
MMS port: 80
MCC: 505
MNC: 11
Authentication type: None
APN type: mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Do not change the default values set by device for all blank fields above. Restart YU Yunique 2.

For YU Yunique 2, when you type Telstra APN settings, make sure you enter APN settings in correct case. For example, if you are entering Telstra Internet & MMS APN settings make sure you enter APN as telstra.iph and not as TELSTRA.IPH or Telstra.iph. If entering Telstra APN Settings above to your YU Yunique 2, APN should be entered as telstra.internet and not as TELSTRA.INTERNET or Telstra.internet.

Telstra MCC-MNC values

505-01
505-11
505-71
505-72

YU Yunique 2 compatibility with Telstra

YU Yunique 2 is compatible with below network frequencies of Telstra.

3G
HSDPA Not compatible
4G
LTEBand 3 1800 MHz*
*These frequencies of Telstra may not have countrywide coverage for YU Yunique 2.

Explain YU Yunique 2 compatibility with Telstra

Telstra 3G APN with YU Yunique 2

YU Yunique 2 does not support Telstra 3G.

Telstra 4G LTE APN with YU Yunique 2

YU Yunique 2 supports Telstra 4G on LTE Band 3 1800 MHz only in some areas of Australia.

Overall compatibililty of YU Yunique 2 with Telstra is 33%. The compatibility of YU Yunique 2 with Telstra, or the Telstra network support on YU Yunique 2 we have explained here is only a technical specification match between YU Yunique 2 and Telstra network. Even YU Yunique 2 is listed as compatible here, Telstra network can still disallow (sometimes) YU Yunique 2 in their network using IMEI ranges. Therefore, this only explains if Telstra allows YU Yunique 2 in their network, whether YU Yunique 2 will work properly or not, in which bands YU Yunique 2 will work on Telstra and the network performance between Telstra and YU Yunique 2. To check if YU Yunique 2 is really allowed in Telstra network please contact Telstra support. Do not use this website to decide to buy YU Yunique 2 to use on Telstra.

Max download & upload speeds on Telstra 4G for YU Yunique 2 per LTE band

Band 3 1800 150.8 Mbps 51 Mbps

YU Yunique 2 network specifications

OS Android 7.0 (Nougat)
Network bands GSM / HSPA / LTE
Speed HSPA 42.2/11.5 Mbps, LTE Cat4 150/50 Mbps
Network frequencies GSM 900 / 1800 / 1900 - SIM 1 & SIM 2
HSDPA 900 / 2100
LTE band 3(1800), 40(2300)
See full specs at GSM.COOL... Select a different device... Select a different network...
YU Yunique Telstra APN settings
33% compatible with Telstra
LTE